編輯此資訊 : How to use machine stretch warp film

推廣資訊

分類目錄: *

信息類型: *

公司庫品牌庫產品庫供應信息求購信息服務項目解決方案業界資訊新聞事件展會情報名詞解釋知識庫文章招聘信息網址連接圖片庫資料下載創業加盟招商合作促銷活動其它信息

標題: *

詳細內容: *

Once you have chosen the right type of machine film and understand containment force, use the following quick tips to get the most secure wrap 1.Anytime you’re adjusting the machine wrapper for a new load, make sure to start with the wrap arm speed or turntable. Then work up to a suitable speed your pallet can handle. Failure to do so may result in you restacking loads that have fallen. 2.Next set the bottom and top wrap counts and the film overwrap at the top of the load. Start with “2” for the bottom and “2” for the top counts. 3.Then adjust the film delivery system down and up speed. Unless the owner’s manual suggests, you can start with approximately 6 inches overlap of film bands. 4.Lastly, you can adjust the wrap force. The goal is to apply as much force as possible without twisting the load, crushing the load, or breaking the film Once wrapped, you can measure the containment force at the bottom, middle, and top of the load with your measurement tool. You should adjust the settings and repeat the previous steps until you get the desired containment force.

上傳圖片:

* (jpg , gif , png) format

聯繫人信息

姓名: *

電子信箱: *

手機:

公司名稱:

聯繫電話:

詳細地址:

郵遞區號:

網址URL:

其他

關鍵字:

有效期:

* 天

管理密碼:*

* 刪除/修改

更換密碼:

* 如有必要，可重新設置新的管理密碼

刪除此資訊

*