編輯此資訊 : Water and electricity integrated quick-change connector

推廣資訊

分類目錄: *

信息類型: *

公司庫品牌庫產品庫供應信息求購信息服務項目解決方案業界資訊新聞事件展會情報名詞解釋知識庫文章招聘信息網址連接圖片庫資料下載創業加盟招商合作促銷活動其它信息

標題: *

詳細內容: *

With the development of new energy vehicles, people’s requirements for the cruising range of new energy vehicles are also increasing. In order to increase the cruising range of new energy vehicles, engineers proposed a quick-change solution to achieve power supplementation by replacing a low-power battery pack with a fully charged battery pack. In order to realize the quick-change solution for vehicles, the battery pack must meet the quick-change requirements, which requires the replacement of ordinary connectors with quick-change connectors on the basis of traditional battery packs. At present, quick-change connectors on the market can be divided into two types, water quick-change connectors and electric quick-change connectors. In the production process of the device, two molds need to be designed, which is a waste of cost. There are certain repetitive operations during the installation of the battery pack, which leads to an increase in assembly time. When installing the E-Mobility vehicle, it is necessary to accurately position the water quick-change connector and the electric quick-change connector, which increases the installation sequence and difficulty of the body-side connector. In order to solve the shortcomings of the water-exchange connector and the electric-exchange connector, our engineers have developed a water and electricity integrated quick-change connector. The specific performance of the product is as follows: The E-Mobility vehicle floating end is designed with 4 springs to realize the automatic compensation function of the position error of the vehicle floating end. The floating end of the E-Mobility vehicle is equipped with a guide pin, which cooperates with the guide sleeve on the fixed end of the battery to realize the function of position correction and pre-positioning when the product is inserted. A guide sleeve is designed on the fixed end of the battery to match the guide pin installed on the floating end, the fixed end flange of the battery. An installation gasket is designed on the upper part to seal the installation interface of the battery pack at the fixed end of the battery. After the vehicle floating terminal and the battery fixed terminal are plugged in, the protection level is IP68. Various terminals and quick-change liquid cooling channels in the product adopt modular design, with a total of 300A high-current modules. There are three types of modules: 20A power supply + 5A signal module and a quick-change liquid cooling module. connector Advantage: 1. The quick change of water and electricity shares a set of modules, which reduces the cost. 2. During the assembly process, the installation time of the production line is saved 3. In the electric quick change connector, add low-voltage power pins to improve safety. 4. The problem of lightweight battery system is solved, and the energy density of power lithium battery system is improved.

上傳圖片:

* (jpg , gif , png) format

聯繫人信息

姓名: *

電子信箱: *

手機:

公司名稱:

聯繫電話:

詳細地址:

郵遞區號:

網址URL:

其他

關鍵字:

有效期:

* 天

管理密碼:*

* 刪除/修改

更換密碼:

* 如有必要，可重新設置新的管理密碼

刪除此資訊

*